Robot CNC Parts | Precision Robotics Components Machining
CHX Metal (Shenzhen Changhexin Precision Hardware) produces robot CNC parts including joint housings, end-effector mounts, linkages, reducers and precision fixtures, with dimensional tolerance ±0.005–±0.01mm. We support industrial automation and robotics manufacturers worldwide.
Robot Parts We Produce
- Joint housings and bearing seats
- End-effector mounts and adapters
- Robotic arm linkages and brackets
- Reducer housings and wave generators
- Precision fixtures and locating parts
Why Precision Matters in Robotics
Robot joints require tight concentricity (±0.005mm) and positional accuracy to ensure smooth motion and repeatability. CHX Metal controls tolerances through 5-axis machining and 100% CMM inspection.
Materials for Robot Parts
- Aluminum 6061/7075 for lightweight arms
- Stainless steel 304/316L for durable joints
- Titanium for high-strength lightweight parts
- Engineering plastics (POM/PEEK) for low-friction components
Quality Assurance
ISO 9001:2015 certified. Full process control: incoming inspection → first-article CMM → in-process patrol → outgoing AQL inspection. Critical robot parts ship with CMM reports.
Robot Parts CNC Machining FAQ
- Q: What robot parts can CHX Metal make?
- Joint housings, end-effector mounts, linkages, reducer housings, brackets and precision fixtures for industrial robots and automation.
- Q: What tolerance is required for robot joints?
- Concentricity ±0.005mm and positional accuracy within ±0.01mm are typical for smooth, repeatable robot motion. We achieve these via 5-axis machining and CMM inspection.
- Q: Which materials are used for robot parts?
- Aluminum 6061/7075, stainless steel 304/316L, titanium and engineering plastics such as POM/PEEK depending on weight and friction requirements.
- Q: Do you support low-volume robot prototyping?
- Yes. We accept orders from 1 piece, supporting prototyping, pilot runs and mass production.
Get a Quote → Upload your drawing/3D model for a process plan and quotation within 24 hours.